|Topic Review (Newest First)|
|12-28-2012 06:34 PM|
|Liesje||Yep, it would definitely help me. Even if we still have some moisture, we won't have 75 year old wood getting damp and moldy with leaded paint peeling off!|
|12-28-2012 06:24 PM|
Originally Posted by kiya View Post
It all depends on why you have the moisture IMO.
|12-28-2012 05:54 PM|
Originally Posted by DHau View Post
Originally Posted by GatorBytes View Post
|12-28-2012 03:32 PM|
Originally Posted by DHau View Post
|12-28-2012 03:31 PM|
|Liesje||We need new windows too. Our house is 75 years old. Windows are all single pane, sash weights (mostly broken). I do like the look of them being all wood but we have the same problem with moisture. Also we have some drafty areas. Even if new windows can't help with heat I'm sure they could stop me feeling cold air blowing through the back of my love seat! Because our house is so old we also assume lead paint which further complicates who can do the installation and how it is done (if we want to do it legit).|
|12-28-2012 03:23 PM|
We had Alside windows installed in Colorado Springs and spent $16K for 32 windows, most custom sized and some fixed, some double hung all had the mullions (sp)? Had the same company make windows for our house in VA and it was about $8K. We got HUGE tax credits from the feds and almost $1500 in rebates from the state of VA.
We've replaced windows in 3 of the 5 homes we have owned. Never regretted it!! My house is so much more energy efficient, quieter and more comfortable. Windows are easy to overlook, but when you consider how much of your walls are taken up by windows, you can appreciate the improvement immediately when you replace them.
Definitely shop around. If you don't need fancy wood inside/vinyl outside type of windows, you should be able get them fairly reasonably priced. Anderson and Pella windows are expensive, but if you don't need that level of custom styled windows, don't pay for them.
|12-28-2012 02:51 PM|
I cannot really comment on residential window applications...You mention 16 windows, are these fixed with sliders? Meaning the Upper window is a fixed IGU (insulated glass unit), with vinyl stops (frame) and then lower be left or right sliding glass and screen (usually 3 sliders in more current apps. unlike yrs ago when just a single slider and screen w/aluminum frame). The sliders would be single lite (glass) held in frame with rubber gasket - the sliding lite would not fog as there is no air space such as in the IGU....when an IGU fails you will get the condensation/fogging between the glass - this part has to be replaced. If the application allows removal of the stops and the IGU pulled, then all you have to replace is the failing IGU. If it is Pella or perhaps other "brands" and is a whole kit such as tilt out which is fabbed and installed whole instead of in parts, then the glass and framing would have to go - this would apply if old windows are a fabbed kit or the new purchase.
The doors - are you looking at front insulated double doors (decorative) (or two seperate) w/1/4 or 1/2 or full door lite and iron or brass inlay or are you talking about patio doors, with or without side lite or transom?
I had a friend recently have a single front insulated door done w/side lite and that alone was 3K.
Another thing to consider about variables in costs and R factor is to get "Low E, Argon gas filled"
(I used to own a glass and door service company - my BF did the installs, I ran the biz - however we did mostly high rise condo's and commercial/industrial/retail service work for banks and arena's with a little residential - usually a fogged IGU in residential)
|12-28-2012 02:18 PM|
|DHau||I have 16 dual pane windows and some have arches. They all have condensation in the morning and produce puddles on the sills. Lowes brought out samples only of their store brand, not Paella or other big name brands.|
|12-28-2012 01:33 PM|
|Marnie||If I were you, I would be selective on replacing windows. Replace the ones you have problems with (condensation, drafts, etc.) Leave the rest. You didn't mention your furnace but if it isn't the most energy efficient, you will get more value replacing it than windows. I have an old farmhouse and replaced 8 windows on the front side of the house (I wanted all windows on each side to match). Saw no difference in the fuel costs.|
|12-28-2012 11:57 AM|
|Jax08||My husband said the same things as Carolyn's, and he works at a building supply place. How many windows, size of windows, doors, brand of windows, it all factors. Definitely get more than one estimate. Call some local contractors who will include installation in their price.|
|This thread has more than 10 replies. Click here to review the whole thread.|